Image for PROLINE G2 19-Inch Rack Angles from Pentair | Hoffman
+ / - Hover over image to Zoom

PROLINE G2 19-Inch Rack Angles

Bulletin Number:

  • P40
  • Select Item modify product

    TO VIEW AN ITEM AND ADD IT TO YOUR PROJECT LIST,
    YOU MUST SELECT AN ITEM.

    19-in. Rack Angles can easily be mounted in a modular enclosure.<br/>Furnished in pairs, Rack Angles have two mounting surfaces (left and right) that serve as mounts for both rack equipment and rack accessories. Rack Angles can be attached to the frame in the front and/or the back. Adjustable Rack-Mounting Rails can be used to position Rack Angles anywhere within the modular enclosure frame.

    Application:

    19-in. Rack Angles can easily be mounted in a modular enclosure. Furnished in pairs, Rack Angles have two mounting surfaces (left and right) that serve as mounts for both rack equipment and rack accessories. Rack Angles can be attached to the frame in the front and/or the back. Adjustable Rack-Mounting Rails can be used to position Rack Angles anywhere within the modular enclosure frame.

    Features:

  • Comply with ANSI/EI A RS-310-D rack mounting standards
  • Can be mounted directly to the enclosure frame or in almost any location using Adjustable Rack-Mounting Rails or Grid Straps.
  • Furnished in pairs and are available with tapped holes that directly accommodate 10-32 screws or square holes for use with cage nuts and M5, M6 or 10-32 screws
  • Specifications:

  • Tapped Rack Angles are 12 gauge (2.5mm) steel with 10-32 tapped holes
  • Square-Hole Rack Angles are 14 gauge (1.75 mm) steel designed to accept metric or English cage nuts
  • Attach directly into a 600-mm wide enclosure frame
  • To mount in 800-mm wide frames, use frame reducing brackets (not included) or Adjustable Rack-Mounting Rails
  • 1200-mm frames require center uprights (not included) to mount in right or left section; 1600-mm frames require both center uprights and two sets of frame reducing brackets or Adjustable Rack-Mounting Rails
  • Optional rack mounted shelves, drawers, guides and pull-out shelves require two sets of Rack Angles or Frame Accessory Brackets installed in the frame
  • All mounting hardware to install Rack Angles to the frame is included (Hardware to attach items to the Rack Angles are either included with the item or purchased separately if necessary)
  • Finish:

    Plated

    Load Ratings:

  • 20 lbs. (9.1 kg) per rack unit for equipment under 20 in. (508 mm) deep
  • Equipment over 20 in. (508 mm) deep or over 20 lb. (9.1 kg) per rack unit requires rear support
  • Accessories:

  • Frame Accessory Brackets
  • Frame-Reducing Brackets
  • Grid Straps
  • Center Upright
  • Rack Panels
  • Rack Mount Pull-out Shelf
  • Rack Mount Fixed Shelf
  • Rack Angle Mounted Drawer
  • Writing Surface
  • Adjustable Rack-Mounting Rails
  • Slides
  • Filler Panel for Rack Angles
  • Rack Angle Adapter Bracket
  • Screw Package
  • Cage Nut Package
  • Drawings and Technical Publications are available by clicking the "Items" tab. Select your desired Catalog Number and click on the Downloads tab for that particular catalog number.
     
    Catalog Number Hole Type H in. Fits Frame Height (mm) Rack Units
    Catalog Number Hole Type H in. Fits Frame Height (mm) Rack Units
    Square 19.3 600 11
    Tapped 19.3 600 11
    Square 26.3 800 15
    Tapped 26.3 800 15
    Square 35.0 1000 20
    Tapped 35.0 1000 20
    Square 42.0 1200 24
    Tapped 42.0 1200 24
    Square 50.8 1400 29
    Tapped 50.8 1400 29
    Square 57.8 1600 33
    Tapped 57.8 1600 33
    Square 66.5 1800 38
    Tapped 66.5 1800 38
    Square 73.5 2000 42
    Tapped 73.5 2000 42
    Square 82.3 2200 47
    Tapped 82.3 2200 47