Wire and Cable Management

Product List
Products (  1 - 12 of 152  )
Next Page
Compare Selected compare product
Product Listing
Lay-In NEMA Type 1 Hinged Cover Wireway Straight Section
Bulletin Number: F40
Material: Steel
RoHS Flag: Yes

Available in lengths from 12.00 in. (305 mm), with or without knockouts.

Lay-In NEMA Type 12 Wireway Straight Section
Bulletin Number: F10
Material: Steel
RoHS Flag: Yes

Available in lengths from 6.00 in. (152 mm) to 120.00 in. (3048 mm).

Wiring Trough, NEMA Type 3R
Bulletin Number: F40PT
Material: Steel
RoHS Flag: Yes

Available in a range of sizes, this wiring trough meets basic functionality requirements for applications subjected to moisture.

Lay-in Painted Flat-Cover Wireway, NEMA TYPE 1 Straight Section
Bulletin Number: F40FC
Material: Steel
RoHS Flag: Yes

Protects electrical wiring in applications where dust, dirt, oil and water are not serious problems. All sections and fittings are completely open on one side so wires and cables can be laid in along wireway run. No pulling through of wires or cables prevents damage to insulation that often occurs in a pull-through wiring system. Flat cover design allows for mounting flush with walls or ceilings. Keyhole screw slots on flat covers provide easy access.

Stainless Steel Feed-Through NEMA Type 4X Wireway Straight Section
Bulletin Number: F22
RoHS Flag: Yes

Available in lengths from 12 in. (305 mm) to 120 in. (3038 mm).

Feed-Through NEMA Type 12 Wireway Straight Section
Bulletin Number: F20
Material: Steel
RoHS Flag: Yes

Available in lengths from 12 in. (305 mm) to 120 in. (3038 mm).

Lay-In NEMA Type 3R Wireway Straight Section
Bulletin Number: F30G
Material: Steel
RoHS Flag: Yes

Available in lengths from 12 in. (305 mm) to 120 in. (3038 mm).

CLEAN TRAY Stainless Steel Cable Tray
Bulletin Number: F23
RoHS Flag: Yes

Straight sections are available in 10-ft. lengths with or without perforations. Available with a 20-degree sloped cover in some sizes. One U-connector and hardware is supplied with each straight section.

Fiberglass Feed-Through NEMA Type 12 and 3R Wireway Straight Section
Bulletin Number: F25
Material: Fiberglass
RoHS Flag: Yes

Because sections of lay-in wireway can be mounted with covers oriented in any direction, three different 90-degree elbows are available. Proper selection allows the user to maintain the same access and thereby preserve the lay-in feature for right-angle installations.

90-Degree  Elbows
Bulletin Number: F10
Material: Steel
RoHS Flag: Yes
90-Degree Elbow
Bulletin Number: F22
RoHS Flag: Yes
Closure Plate
Bulletin Number: F40PF
Material: Steel
RoHS Flag: Yes

Closes the end of a wireway section or run.

Next Page